Lenovo ThinkSystem SR650 V3 7D75 - Security Bezel Replacement; Remove the Security Bezel

Figure 209. Installing the top cover support bracket
After you finish
1. Reinstall the drives or drive fillers into the rear drive cage. See “Install a hot-swap drive” on page 83.
2. Complete the parts replacement. See
“Complete the parts replacement” on page 269.
Security bezel replacement
Use this information to remove and install the security bezel.
• “Remove the security bezel” on page 237
• “Install the security bezel” on page 238
Remove the security bezel
Use this information to remove the security bezel.
About this task
Attention: Read
“Installation Guidelines” on page 55 and “Safety inspection checklist” on page 56 to ensure
that you work safely.
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
BmyijyY0-lNvapM4fTV5Gf
.
Procedure
Step 1. Use the key to unlock the security bezel.
Chapter 5. Hardware replacement procedures 237