Table 32. Location of RAID flash power modules
Figure 161. On the chassis
Figure 162. On standard air baffle
Figure 163. On GPU air baffle Figure 164. On the 2.5-inch middle drive cage
• “Remove a RAID flash power module from the chassis” on page 198
• “Install a RAID flash power module on the chassis” on page 200
• “Remove a RAID flash power module from the air baffle” on page 202
• “Install a RAID flash power module on the air baffle” on page 203
• “Remove a RAID flash power module from the middle 2.5-inch drive cage” on page 204
• “Install a RAID flash power module on the middle drive cage” on page 206
Remove a RAID flash power module from the chassis
Use this information to remove a RAID flash power module (supercap) from the chassis.
About this task
Attention:
• Read
“Installation Guidelines” on page 55 and “Safety inspection checklist” on page 56 to ensure that you
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 73.
198 ThinkSystem SR650 V3 User Guide
To Next Page
Loading...
