a. Remove the screw that secures the front I/O module.
b.
Slide the media bay out of the front chassis.
Step 4. (Optional) If you are replacing the integrated diagnostics panel, remove the diagnostics panel from
the front I/O module.
Figure 62. Diagnostics panel removal
a. Press down the clips as shown.
b.
Pull the diagnostics panel by its handle to get it out of its assembly.
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the front I/O module
Use this information to install the front I/O module.
About this task
Depending on the server model, the server might come with one of the following front operator panels:
106
ThinkSystem SR650 V3 User Guide
To Next Page
Loading...
