Figure 394. NVMe cable routing
From To
1 Backplane 2: NVMe 0-1
Onboard: PCIe 8
2 Backplane 2: NVMe 2-3
Onboard: PCIe 7
3 Backplane 2: NVMe 4-5, 6-7
Onboard: PCIe 6, 5
4 Backplane 3: NVMe 0-1, 2-3
Onboard: PCIe 3, 4
5 Backplane 3: NVMe 4-5
Onboard: PCIe 2
6 Backplane 3: NVMe 6-7
Onboard: PCIe 1
One 8 x SAS/SATA and two 8 x AnyBay backplanes
This section provides cable routing information for the server model with one 8 x 2.5-inch SAS/SATA and two
8 x 2.5-inch AnyBay front drive backplanes.
To connect power cables for the front backplane(s), refer to
“Backplanes: server models with 2.5-inch front
drive bays” on page 297
.
8i RAID/HBA adapter + 16i Trimode RAID adapter
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Chapter 6
. Internal cable routing 391
To Next Page
Loading...
