Lenovo ThinkSystem SR650 V3 7D75 - Two 8 X SAS;SATA and One 8 X Anybay; Backplanes

Figure 395. Cable routing to one 8i adapter and one Trimode 16i adapter
From To
1 Backplane 1: SAS
8i adapter
• C0
2 Backplane 2: SAS
16i adapter
• C0
3 Backplane 3: SAS
• C1
Two 8 x SAS/SATA and one 8 x AnyBay (Gen 4) backplanes
This section provides cable routing information for the server model with two 8 x 2.5-inch SAS/SATA and one
8 x 2.5-inch AnyBay (Gen 4) front drive backplanes.
•
“Front backplanes: 16 x 2.5" SAS/SATA + 8 x 2.5" AnyBay” on page 392
• “Front + rear backplanes: (16 x 2.5" SAS/SATA + 8 x 2.5" AnyBay) + 4 x 2.5" SAS/SATA” on page 397
Front backplanes: 16 x 2.5" SAS/SATA + 8 x 2.5" AnyBay
This topic provides cable routing information for the 16 x 2.5" SAS/SATA + 8 x 2.5" AnyBay (Gen 4)
configuration.
To connect power cables for the front backplane(s), refer to
“Backplanes: server models with 2.5-inch front
drive bays” on page 297.
392
ThinkSystem SR650 V3 User Guide