Figure 419. Cable routing when two processors installed
Figure 420. Cable routing when one processor installed
From To From To
1 Backplane 3: NVMe 0-1
Onboard: PCIe 8
1 Backplane 3: NVMe 0-1,
2-3
Onboard: PCIe 3, 4
2 Backplane 3: NVMe 2-3 Onboard: PCIe 7 2 Backplane 3: NVMe 4-5 Onboard: PCIe 2
3 Backplane 3: NVMe 4-5,
6-7
Onboard: PCIe 4, 3
3 Backplane 3: NVMe 6-7 Onboard: PCIe 1
24 x 2.5" SAS/SATA expander backplane
This section provides cable routing information for the server model with the 24 x 2.5" SAS/SATA expander
backplane.
• “Front backplane: 24 x 2.5" SAS/SATA” on page 411
• “Front + rear backplanes: 24 x 2.5" SAS/SATA + 8 x 2.5" SAS/SATA” on page 412
Front backplane: 24 x 2.5" SAS/SATA
This topic provides cable routing information for the front 24 x 2.5-inch SAS/SATA expander backplane.
8i adapter
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Chapter 6
. Internal cable routing 411
To Next Page
Loading...
