Table 23. Parts list (continued)
Index
Description
Tier 1 CRU Tier 2 CRU FRU
Consumable
and structural
parts
47
Add-on air baffle (for GPU air
baffle)
√
48
GPU air baffle
√
49
Standard air baffle
√
50
Air baffle filler (for standard air
baffle)
√
51
Middle 8 x 2.5-inch drive cage
√
52
Middle 4 x 3.5-inch drive cage
√
53
PSU air baffle
√
54
Processor board
√
55
MicroSD card
√
56
System I/O board
√
57
Firmware and RoT security
module
√
58
Riser 3 cage
√
59
Riser 1 or riser 2 cage
√
60
1U riser cage
√
61
Riser card (LP)
√
62
Riser 1 or riser 2 card
√
63
Riser 3 card
√
Power cords
Several power cords are available, depending on the country and region where the server is installed.
To view the power cords that are available for the server:
1. Go to:
http://dcsc.lenovo.com/#/
2. Click Preconfigured Model or Configure to order.
3. Enter the machine type and model for your server to display the configurator page.
4. Click Power ➙ Power Cables to see all line cords.
Notes:
• For your safety, a power cord with a grounded attachment plug is provided to use with this product. To
avoid electrical shock, always use the power cord and plug with a properly grounded outlet.
• Power cords for this product that are used in the United States and Canada are listed by Underwriter's
Laboratories (UL) and certified by the Canadian Standards Association (CSA).
Chapter 3. Parts list 49
To Next Page
Loading...
