Figure 63. Diagnostics panel installation
Step 3. Install the front I/O module.
Figure 64. Front I/O module without the LCD display
Figure 65. Front I/O module with the LCD display
(integrated diagnostics panel)
a. Insert the front I/O module into the front chassis.
b.
Install the screw to secure the front I/O module in place.
After you finish
1. Connect the cables of the front I/O module to the system board assembly. See
Chapter 6 “Internal cable
routing” on page 271
.
2. Complete the parts replacement. See
“Complete the parts replacement” on page 269.
GPU replacement
Use this information to remove and install a GPU adapter.
108
ThinkSystem SR650 V3 User Guide
To Next Page
Loading...
