Figure 92. Removing the M.2 backplane from the air baffle
a. Unfasten the screw that secures the M.2 backplane to the air baffle.
b.
Slide and hold the retention clip on the air baffle.
c.
Remove the M.2 backplane from the air baffle, and release the retention clip.
M.2 backplane on the middle drive cage
1. Open the drive cage handle.
Figure 93. Opening the handle of the middle drive cage
2. Remove the M.2 drive from the M.2 backplane. See
“Remove an M.2 drive” on page 127.
3. Remove the M.2 backplane from the middle drive cage.
132
ThinkSystem SR650 V3 User Guide
To Next Page
Loading...
