Lenovo ThinkSystem SR650 V3 7D75 - Page 280

Attention: For proper cooling and airflow, reinstall the air baffle before you turn on the server. Operating
the server with the air baffle removed might damage server components.
4. Reinstall the top cover. See
“Install the top cover” on page 268.
5. If the sever was installed in a rack, reinstall the server into the rack. See
“Install the server to rack” on
page 77
.
6. Reconnect the power cords and any cables that you removed.
7. Power on the server and any peripheral devices. See
“Power on the server” on page 73.
8. Update the server configuration.
• Download and install the latest device drivers:
http://datacentersupport.lenovo.com.
• Update the system firmware. See
“Update the firmware” on page 445.
• Update the UEFI configuration. See
https://pubs.lenovo.com/uefi-overview/.
• Reconfigure the disk arrays if you have installed or removed a hot-swap drive or a RAID adapter. See
https://sysmgt.lenovofiles.com/help/topic/lxpm_frontend/lxpm_product_page.html for the LXPM
documentation compatible with your server.
270
ThinkSystem SR650 V3 User Guide