NVMe cable routing
Figure 305. Cable routing when two processors installed Figure 306. Cable routing when one processor installed
From To From To
1 Backplane 2: NVMe 0-1
Onboard: PCIe 8
1 Backplane 2: NVMe 0-1,
2-3
Onboard: PCIe 3, 4
2 Backplane 2: NVMe 2-3 Onboard: PCIe 7 2 Backplane 2: NVMe 4-5 Onboard: PCIe 2
3 Backplane 2: NVMe 4-5,
6-7
Onboard: PCIe 6, 5
3 Backplane 2: NVMe 6-7 Onboard: PCIe 1
Onboard connectors + CFF 16i RAID/HBA adapter
The following shows the cable connections for the 8 SAS/SATA + 8 AnyBay (Gen 4) configuration with one
internal CFF 16i RAID/HBA adapter.
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Chapter 6
. Internal cable routing 321
To Next Page
Loading...
