Figure 330. Rear backplane cable routing
From To
1 Backplane 4: SAS CFF expander
• C3
2 Backplane 4: PWR Onboard: 7mm backplane power connector
CFF 16i RAID/HBA adapter + CFF expander
This topic provides cable routing information for the 24 x 2.5-inch SAS/SATA + 4 x 2.5-inch SAS/SATA
configuration with one CFF expander and one CFF 16i RAID/HBA adapter.
Front backplane cable routing
Cable routing when two processors installed
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Chapter 6
. Internal cable routing 343
To Next Page
Loading...
