32i RAID/HBA adapter
This topic provides cable routing information for the 24 x 2.5-inch SAS/SATA + 8 x 2.5-inch SAS/SATA
configuration with one 32i RAID/HBA adapter.
Front backplane cable routing
Connections between connectors: 1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Figure 334. SAS/SATA cable routing to 32i adapter
From To
1 Backplane 1: SAS
32i adapter
• C0
2 Backplane 2: SAS
• C1
3 Backplane 3: SAS
• C2
Rear backplane cable routing
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Chapter 6
. Internal cable routing 347