Front backplanes: 24 x NVMe
This section provides cable routing information for the server model with three 8 x 2.5-inch NVMe front drive
backplanes (Gen 4).
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Onboard PCIe connectors + Retimer
Figure 388. NVMe cable routing to onboard connectors and retimer
From To
1 Backplane 1: NVMe 0-1
Onboard: PCIe 10
2 Backplane 1: NVMe 2-3
Onboard: PCIe 9
3 Backplane 1: NVMe 4-5
Onboard: PCIe 8
4 Backplane 1: NVMe 6-7
Onboard: PCIe 7
5 Backplane 2: NVMe 0-1, 2-3
Onboard: PCIe 6, 5
6 Backplane 2: NVMe 4-5, 6-7
Onboard: PCIe 3, 4
7 Backplane 3: NVMe 0-1
Onboard: PCIe 2
8 Backplane 3: NVMe 2-3 Onboard: PCIe 1
9 Backplane 3: NVMe 4-5, 6-7 Retimer: C0, C1
Chapter 6. Internal cable routing 385
To Next Page
Loading...
