Figure 434. Front/Rear backplane signal cable routing
Figure 435. Rear backplane power cable routing
From To From To
1 Backplane 1: SAS 0,
SAS 1
16i adapter
• Gen 4: C0
• Gen 3: C0C1
1 Backplane 4: PWR
• Onboard: backplane
power
• Onboard: backplane
sideband
• Riser 1: PWR
2
• Backplane 1: SAS 2
• Backplane 4: SAS
• Gen 4: C1
• Gen 3: C2C3
12 x 3.5" SAS/SATA + 4 x 3.5" SAS/SATA
This topic provides cable routing information for the 12 x 3.5-inch SAS/SATA front backplane and a 4 x 3.5-
inch SAS/SATA rear backplane.
16i RAID/HBA adapter
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Chapter 6
. Internal cable routing 423
To Next Page
Loading...
