Figure 460. SAS/SATA cable routing Figure 461. NVMe cable routing
From To From To
1 Backplane 1: SAS 0,
SAS 1
8i adapter
• Gen 4: C0
• Gen 3: C0C1
1 Backplane 1: NVMe 8-9,
10-11
Onboard: PCIe 3, 4
Front + rear backplanes: (8 SAS/SATA + 4 NVMe) + 4 SAS/SATA
This topic provides cable routing information for the (8 SAS/SATA + 4 NVMe) + 4 SAS/SATA configuration
using the 12 x 3.5-inch AnyBay front backplane and 4 x 3.5-inch SAS/SATA rear backplane.
16i RAID/HBA adapter
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Chapter 6
. Internal cable routing 437
To Next Page
Loading...
