Figure 467. Front/Rear backplane signal cable routing
Figure 468. Rear backplane power cable routing
From To From To
1 Backplane 4: SAS Backplane 1: SAS 1
1 Backplane 4: PWR Riser 2: PWR1, PWR2
2 Backplane 1: SAS 0
8i adapter
• Gen 4: C0
• Gen 3: C0C1
Front + middle + rear backplanes: 12 x 3.5" SAS/SATA + 4 x 3.5" SAS/SATA+ 4 x 3.5"
SAS/SATA
This topic provides cable routing information for the front 12 x 3.5-inch SAS/SATA expander backplane with
a 4 x 3.5-inch SAS/SATA middle drive backplane and a 4 x 3.5-inch SAS/SATA rear drive backplane.
16i adapter
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Chapter 6
. Internal cable routing 441
To Next Page
Loading...
