Figure 54. Removing the front OCP interposer card
a. Loosen the screws that secure the front OCP interposer card.
b.
Lift the front OCP interposer card up off the front OCP cage.
After you finish
1. Install a new front OCP interposer card. See
“Install the front OCP interposer card” on page 97.
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install the front OCP interposer card
Follow instructions in this section to install the front OCP interposer card.
About this task
Attention:
• Read
“Installation Guidelines” on page 47 and “Safety inspection checklist” on page 48 to ensure that you
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 62.
Chapter 5. Hardware replacement procedures 97
To Next Page
Loading...
