Lenze i55AE155F

Address Designaon Default seng Category Data type Factor A M
0x6073
(P324.00)
Max current 200.0 % general U16 10 P r
0x6074 Torque demand value x.x % (Read only) MCTRL I16 10 O -
0x6075
(P323.00)
Motor rated current 1.700 A * MCTRL U32 1000 PC -
0x6076
(P325.00)
Motor rated torque 1.650 Nm * MCTRL U32 1000 PC -
0x6077
(P107.00)
Torque actual value x.x % (Read only) general I16 10 O t
0x6078
(P103.00)
Current actual value x.x % (Read only) general I16 10 O t
0x6079 DC link circuit voltage x.xxx V (Read only) general U32 1000 O t
0x6080
(P322.00)
Max motor speed 6075 rpm general U32 1 OP r
0x6085
(P790.00)
Quick stop deceleraon 546000 pos. unit/s² general U32 1 P -
0x60E0 Posive torque limit 250.0 % general U16 10 P r
0x60E1 Negave torque limit 250.0 % general U16 10 P r
0x60FD
(P118.00)
Digital inputs - (Read only) general U32 1 O t
0x6402 Motor type Squirrel cage inducon
[7]
MCTRL U16 1 P -
0x6502
(P789.00)
Supported drive modes - (Read only) general U32 1 - -
* Default seng depending on the size. Firmware version 05.00.00.00
Appendix
Parameter aribute list
701