Lenze i55AE155F

Parameter Name / value range / [default seng] Info
0x2DAE:008
(P140.08)
Sequencer diagnoscs: Relave sequence me
remaining
(Sequencer diag: SeqTime remain %)
•
Read only: x %
•
From version 03.00
Display of the residual me of the sequence in [%].
0x2DAE:009
(P140.09)
Sequencer diagnoscs: Absolute sequence me
remaining
(Sequencer diag: SeqTime remain)
•
Read only: x.x s
•
From version 03.00
Display of the residual me of the sequence in [s].
Related topics
4Sequencer ^ 504
4Sequencer control funcons ^ 588
6.2.10 Device idencaon
The following parameters show some general informaon about the inverter.
Parameter Name / value range / [default seng] Info
0x2000:001
(P190.01)
Device data: Product code
(Device data: Product code)
•
Read only
Product code of the complete device.
Example: "I55AE155D10V10017S"
•
If control unit and power unit were ordered separately, the product
code "XXXXXXXXXXXXXXXXXXX" is displayed.
0x2000:002
(P190.02)
Device data: Serial number
(Device data: Serial number)
•
Read only
Serial number of the complete device.
Example: "0000000000000000XYZXYZ"
•
If control unit and power unit were ordered separately, the serial
number "XXXXXXXXXXXXXXXXXXX" is displayed.
0x2000:004
(P190.04)
Device data: CU rmware version
(Device data: CU rmware ver.)
•
Read only
Firmware version of the control unit.
Example: "01.00.01.00"
0x2000:005
(P190.05)
Device data: CU rmware type
(Device data: CU rmware type)
•
Read only
Firmware type of the control unit.
Example: "IOFW51AC10"
0x2000:006
(P190.06)
Device data: CU bootloader version
(Device data: CU bootlder ver.)
•
Read only
Bootloader version of the control unit.
Example: "00.00.00.13"
0x2000:007
(P190.07)
Device data: CU bootloader type
(Device data: CU bootlder type)
•
Read only
Bootloader type of the control unit.
Example: "IOBL51AOnn"
0x2000:008
(P190.08)
Device data: Object directory version
(Device data: OBD version)
•
Read only
Example: "108478"
0x2000:010
(P190.10)
Device data: PU rmware version
(Device data: PU rmware ver.)
•
Read only
Firmware version of the power unit.
Example: "00202"
0x2000:011
(P190.11)
Device data: PU rmware type
(Device data: PU rmware type)
•
Read only
Firmware type of the power unit.
Example: "IDFW5AA"
0x2000:012
(P190.12)
Device data: PU bootloader version
(Device data: PU bootlder ver.)
•
Read only
Bootloader version of the power unit.
0x2000:013
(P190.13)
Device data: PU bootloader type
(Device data: PU bootlder type)
•
Read only
Bootloader type of the power unit.
0x2000:014
(P190.14)
Device data: Module - rmware version
(Device data: Mod. rmware)
•
Read only
Firmware version of the plugged-in module (e. g. WLAN module).
0x2000:015
(P190.15)
Device data: Firmware revision number
(Device data: FW revision nr.)
•
Read only
Firmware version of the network opon.
Diagnoscs and fault eliminaon
Diagnoscs parameter
Sequencer diagnoscs
135