Lenze i55AE155F

8.4.3 Motor equivalent circuit diagram data
The motor equivalent circuit diagram data are automacally set if one of the following opmi-
saons is carried out:
4Motor selecon from motor catalogue ^ 197
4Automac motor idencaon (energized) ^ 199
4Automac motor calibraon (non-energized) ^ 200
Parameter Name / value range / [default seng] Info
0x2C01:002 Motor parameters: Stator resistance
0.0000 ... [10.1565]* ... 125.0000 Ω
* Default seng depending on the size.
General motor data.
Carry out sengs as specied by manufacturer data/motor data sheet.
0x2C01:003 Motor parameters: Stator leakage inductance
0.000 ... [23.566]* ... 500.000 mH
* Default seng depending on the size.
0x2C02:001
(P351.01)
Motor parameter (ASM): Rotor resistance
(ASM motor par.: Rotor resistance)
0.0000 ... [8.8944]* ... 200.0000 Ω
* Default seng depending on the size.
Equivalent circuit data of the motor required for the motor model.
0x2C02:002
(P351.02)
Motor parameter (ASM): Mutual inductance
(ASM motor par.: Mutual induct.)
0.0 ... [381.9]* ... 50000.0 mH
* Default seng depending on the size.
0x2C02:003
(P351.03)
Motor parameter (ASM): Magnesing current
(ASM motor par.: Magn. current)
0.00 ... [0.96]* ... 500.00 A
* Default seng depending on the size.
Motor control
Opmisaon of the control loops
Motor equivalent circuit diagram data
201