Lexmark CS725R Service Manual

Sensor (weather station) service check
Action Yes No
Step 1
Check the sensor cable for proper connection and damage, and
replace if necessary.
Does the problem remain?
Go to step 2. The problem is
solved.
Step 2
Replace the sensor. See
“Sensor (weather station) removal ” on
page 311.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
Invalid input option type or ID is detected service check
Action Yes No
Step 1
a Make sure that the latest firmware is installed.
b Make sure that the options configuration is supported. See the
Printer, Option, and Stand Compatibility Guide.
c Reset the printer.
Does the problem remain?
Go to step 2. The problem is
solved.
Step 2
Reseat the interface cable, and then check the cable for damage.
Is the cable free of damage?
Go to step 4. Go to step 3.
Step 3
Replace the cable. See
“550-sheet tray interface cable removal”
on page 383.
Does the problem remain?
Go to step 4. The problem is
solved.
Step 4
Check the printer interface cable and adjacent options for damage.
Are the cable and options free of damage?
Go to step 6. Go to step 5.
Step 5
Replace the cable and options.
Does the problem remain?
Go to step 6. The problem is
solved.
5028
Diagnostic information
181

Lexmark CS725R Specifications

General

Brand	Lexmark
Model	CS725R
Category	Printer
Language	English