3 Select whether to print a single or continuous test page, and then touch Start.
Printer Setup
Printed page count (mono)
This setting displays the amount of pages printed in mono.
1 Enter the Diagnostics menu, and then touch Printer Setup.
2 View the printed page count for mono.
Printed page count (color)
This setting displays the amount of pages printed in color.
1 Enter the Diagnostics menu, and then touch Printer Setup.
2 View the printed page count for color.
Permanent page count
This setting displays the total number of pages printed in mono and color. After all the print tests are completed,
this value resets to zero.
1 Enter the Diagnostics menu, and then touch Printer Setup.
2 View the permanent page count.
Enable edge-to-edge (printing)
This setting shifts all four margins to the physical edges of the page.
1 Enter the Diagnostics menu, and then navigate to:
Printer Setup > Enable edge‑to‑edge (printing)
2 Select a setting.
Note: This feature does not work in PPDS emulation.
Enable edge-to-edge (copy)
This setting determines whether the printer accepts the ADF or flatbed edge erase value when performing an
ADF or flatbed copy.
1 Enter the Diagnostics menu, and then navigate to:
Printer Setup > Enable edge‑to‑edge (copy)
2 Select a setting.
5028
Service menus
246
To Next Page
Loading...
Need help?
General
