Lexmark CS725R Service Manual

6yy errors
647 error messages
Error code Description Action
647.80 The motor (deskew) did not turn on. See
“Motor (deskew) service check” on
page 190.
647.81 The motor (deskew) did not turn o.
647.82 The motor (deskew) speed did not ramp up to the
required level.
647.83 The motor (deskew) stalled.
647.84 The motor (deskew) ran too slow.
647.85 The motor (deskew) ran too fast.
647.86 The motor (deskew) did not run at the correct
timing.
649 error messages
Error code Description Action
649.80 The motor (redrive) did not turn on. See .
649.81 The motor (redrive) did not turn o.
649.82 The motor (redrive) speed did not ramp up to the
required level.
649.83 The motor (redrive) stalled.
649.84 The motor (redrive) ran too slow.
649.85 The motor (redrive) ran too fast.
649.86 The motor (redrive) did not run at the correct
timing.
650 error messages
Error code Description Action
650.80 The motor (duplex/MPF) did not turn on. See
“Motor (duplex/MPF) service check” on
page 192.
650.81 The motor (duplex/MPF) did not turn o.
650.82 The motor (duplex/MPF) speed did not ramp up to
the required level.
650.83 The motor (duplex/MPF) stalled.
650.84 The motor (duplex/MPF) ran too slow.
650.85 The motor (duplex/MPF) ran too fast.
650.86 The motor (duplex/MPF) did not run at the correct
timing.
5028
Diagnostic information
201

Lexmark CS725R Specifications

General

Brand	Lexmark
Model	CS725R
Category	Printer
Language	English