Loma IQ3+ - Page 209

Operating Instructions
199
5.
Tap on the Back button
to display the Save Settings pop-up screen. Then tap on the
green tick 'OK' button to save the changes and close the screen. The Tracker feature is now
enabled fir the selected product.
Setting Up the Reject Options
Reject options for the reject devices fitted are configured in the Rejects Setup
screen.
To set up the rejects options, proceed as follows:
1.
To display the screen, tap on the Reject area
in the System Setup screen. The
Rejects Setup Screen is displayed.
2. Select the required options and enter the appropriate parameter values in the screen. See
the Rejects Setup
screen section for further details.
3.
Once you have entered details and selected the required options, tap on the Back button
to display the Save Settings pop-up screen. Then tap on the green tick 'OK' button to save
the changes and close the screen.