The User Interface
83
Screen Contents
The screen only has one control which is a red cross ‘Cancel’ button. Tapping on the button cancels
the Full Learn process and closes the screen. Alternatively, the screen will also be automatically
closed if no activity is detected for a period of time.
If the Full Learn is not successful this could be because you have selected the “”Dry” product type in
the Product Settings
screen. If so, select the “”Unknown” product type and repeat the Full Learn
process.
Update Learn
Purpose
The Update Learn screen is displayed on top of the Main Run screen and guides the operator through
the Full Learn process by displaying on-screen instructions.
Once the process is complete the Update Learn screen closes, displaying the Main Run
screen.
Screen Contents
The screen only has one control which is a red cross ‘Cancel’ button. Tapping on the button cancels
the Update Learn process and closes the screen. Alternatively, the screen will also be automatically
closed if no activity is detected for a period of time.
To Next Page
Loading...
