Loma IQ3+ - Conveyor Belts; Flat Belts

About the Metal Detector Range
53
■ Communication Packages – The search head is compatible with the following communication
packages:
o
LomaEnet (serial link board required) – The LomaEnet Capture application provides the
facility to distribute copies of reports generated by the metal detector to other suitable
devices that are on the same computer network as the metal detector. This allows
personnel to analyse and archive data.
o
LomaLink (serial link board required) - A serial connection is used to communicate with the
metal detector using a remote PC.
o
Ethernet (serial link & ethernet boards required).
o
LomaOPC (serial link & ethernet boards required) – The LomaOPC application is installed
onto a remote PC and a serial connection established to pass data using OPC tags.
The search head can be fitted with a number of external sensors; an optional sensor board is required
for this.
Conveyor Belts
Loma conveyors are fitted with either flat belts which are suitable for use with lighter products or
plastic modular belts which are suitable for use with heavier products in a harsher environment.
The belts are positively driven from a central drive sprocket that is secured on a square-section drive
shaft. This means that no slippage and no deviation in tracking can occur.
Flat Belts
Flat belts are constructed from polyurethane and have a smooth surface. They are supplied as
standard in white but blue coloured belts are available if required.