Loma IQ3+ - Maintenance; Maintenance Warnings; Cleaning; Cleaning Regime

229
Maintenance
This chapter describes the maintenance procedures for the IQ
3
+ Metal Detector.
Your warranty may be invalidated if you do not follow the maintenance schedule set out
within this user guide. This warranty statement is in addition to the terms of sale.
The following sections provide more information:
■
Maintenance Warnings
A list of applicable safety warnings to be observed when maintaining the metal detector head is
provided.
■ Cleaning
This section provides guidance for cleaning the metal detector.
■
Air Regulator Unit Maintenance
This section provides some guidance covering maintaining the compressed air regulator.
■
Conveyor Belt Maintenance
This section provides some guidance covering maintaining the conveyor belt.
■
Adjusting the Reject Devices
This section provides some guidance covering adjustment of the reject devices.
■
Software Upgrades
This section provides some guidance for upgrading the metal detector software.
Maintenance Warnings
The following safety warnings apply when carrying out maintenance operations on an IQ
3
+ Metal
Detector:
1. LETHAL HAZARD – ELECTRICAL SUPPLIES
2. LETHAL HAZARD – COMPRESSED AIR SUPPLIES
3. NON-IONIZING RADIATION
4. WORKING ON EQUIPMENT
5. REJECT DEVICES
For details see the Safety Warnings section.
Cleaning
Cleaning regime
A typical cleaning regime consists of the 5 stages.
■
Pre-rinse
■
Detergent rinse
■
Rinse
■
Disinfectant rinse