27
Technical Specifications
IQ3+ Metal Detector Head
The technical specification for the IQ
3
+ Metal Detector Head is provided in the table below. Please
note that this specification lists the available options in some cases. The exact specification for your
metal detector head will depend on the options you have selected.
General
Dimensions
Metal detector heads are available in a range of heights and widths to suit a
specific customer requirements, which are agreed prior to manufacture and
confirmed on the Order Acknowledgement provided. Please review this
document for dimensional information.
Power Requirements (Voltage)
Standard Options
220/230V, 1-phase, 50Hz, neutral and earth
110/120V, 1-phase, 60Hz. neutral and earth
Environment
Operating
Temperature
- 10°C to 40°C
Relative Humidity 0 - 95% (non-condensing)
To Next Page
Loading...
