FRONT SUSPENSION
Page
C7
dzb
Rubber Bush
Fig
.3
-
Damper Top Mounting
To Replace
1.
Place the seating washer and lower mounting rubber on the damper spindle.
Offer the damper up throu
g
h the lower link arm and locate the damper
spindle in the top mounting hole.
2.
Fit moulded rubber bush, metal cup washer, nut and locknut, and tighten
to the instructions given in the TECHNICAL
DATA (Top stem mounting).
UPPER
WISHBONE
To Remove
1.
Remove the rood wheel and prepare to support the suspension unit on an axle
stand or trestle.
NOTE:
As a precaution fit spring clamps to the spring and tighten
sufficient to prevent further extension of the spring.
2.
Unscrew the upper ball joint and allow the suspension milt to rest on the
stand.
ESPRIT
To Next Page
Loading...
