FUEL
SYSTEM
Page
L37
THROTTLE CABLE
To Remove
1.
Disconnect the inner cable from its lever on the carburetters.
2.
.Disconnect the outer cable from its bracket on camshaft cover.
3.
Disconnect the inner cable from the accelerator pedal. (Relwse the
inner cable from the clevis.)
4.
Before pulling out the cable see 'To Re
p
lace
1
.
To Replace
1.
To replace the cable, first attach the new cable to the old and then ~ull
through under the carpet.
2.
Attach the clevis at the end of the cable using the pin to the throttle pedal.
Fixing
Studs
,Accelwetor
Pedal A*juster
Fig.
17
Throttle (accelerator) pedal setting
3.
Adjust the inner cable at the carburetters to give the correct free play
(see below) between the inner cable and lever on the carburetters. Ensure
ESPRIT
Issue
04/78
To Next Page
Loading...
