Lotus Esprit Series - Door Adjustments

BODY
Page B29
DOOR ADJUSTMENTS
The Door Assembl
y
cun be adjusted by a small omount on the door beam in the
following manner:
1.
Loosen the two bolts securing the front end of the door assembly near
the hinge.
2.
Loosen the two bolts securing the back end of the door assembly
about the door lock.
3.
Move the door to the desired position and tighten up all bolts.
4.
Adjust the lock striker if necessary.
Fig. 9 - Door Hinge
ESPRIT
Issue 04/78