BOW
Page
B51
Rivets
Fig.21
-
External
B/C
Post Finisher
FRQNT SEAT
b)
TO
REMOVE
l.
Slide the seat fully bockward. From the front end of both seat
runners, release the nuts with their flat washers from the
sat
runner
mounting bolts. (The nuts are on the underside of the body.)
2.
Do not remove the bolts at this stage.
3.
Slide the seat fully forward and release the nuts and washer from both
rear mounting bolts.
4.
Disconnect the seat sensor wires
(if
fitted). Remove the seat assembly.
I
TO
REPLACE
1.
Reverse the removal prokedure.
ESPRIT