Lotus Esprit Series - Differential Assembly

TRANSMISSION
Page F24
Fig.9 Differential assembly
9.
Remove the sealing rlng fqm the shaft housing.
10.
Remove the ail retolnlng washer and bearing distance bush assembly from
the shaft.
To Assemble
NOTE:
The differential drive shaft on the left - hand side of gearbox is the shorter.
1.
Fit the bearing (21) in the houslng and tighten the nut (18) to 10 kg/m
(72 lb/ft) wing the spanner 1770-T. Lock the nut using the grub screw (19).
2.
Fit the oil seal (20) using the tool 1772-1.
3.
Position the oil retaining washer on the shaft. Fit the spacer (16) and
position the mandrel
186P-l. Centrdlise the oil retaining washer with the
mandrel centring bush and fit the spacer using a press.
ESPRIT
Issue 04/78