BODY
Page
056
FRONT
QUARTER LIGHT GLASS (DOOR)
7'0
REMOVE
Remove the door window frame and place it on a felt covered bench. To remove the
glass from the window frame, soak the
'Solbit' sealing/retainer medium in "Solbit-
Primer
i
' for approximately one hour and remove the glass, or
if
the glass cannot be
removed break the glass.
Fig.25
-
Fitting Quarter Ligtit Glass
Remove remaining glass and 'Solbit'from inside the quarter
light channels in the
window frame.
TO
REPLACE
Clean the new glass with methylated spirit
around the front and rear edge of the glass.
Apply 'Solbit
-
Primer' to the edge of glass and a
0.25
inch wide band on both sides of
the front and rear of the glass.
ESPRIT
Issue
04/78
To Next Page
Loading...
