Lotus Esprit Series - S2 Characteristics; Engine Bay Blower; Door Mirrors

ELECTltlCAL EQUIPMENT
Page M22
MODEL S2 CHARACTERISTICS
lristrument
Panel
The instrument ponel in the model S2 is fitted with Smith's instruments and the switch panels
with paddle lever type switches. Each switch is illuminated by a single light source, fed to
the switches through fibreoptic strands. The bri
g
htness of the switch illumination is
controlled by rotating the illumination switch on the right
- hand control ponel in the
binnacle.
Engine Bay Blower
An electric fan
is introduced into the ducting on Federal vehicles and those used in high
dmbient climates. The fan is switched on when a temperature sensor, attached to the top
of the air box, senses an increase in temperature.
The position of the mirror in each door mirror
assembly con be controlled from inside the
car using the four position joystick and the left and right mirror selector switch.
Inside
each mirror assembly ore motors controlling the vertical and
horizdntal planes of the minor.
Where the wiring loom for the electrical control of the mirrors passes through the body
aperture and the inner door panel a grommet (Part No.
X036L6004Z) is fitted. A grommet
(Part No.
X03686150Z) is fitted to prokect the loom when posing through the inner door
panel to the control switches.
The control switch connections are
ss follows.'-
Black wire to terminal L
Yellow wire to terminal P1
White wire to terminal v
Blue wire to terminal W
Red wire to terminal R,
Centre terminol cn the changeover switch,is earth.
Wire connections to the mirrors ore
m& colour to colour and the earth connection to the
chongeover switch is made colour to colour. The earth ring terminal
is conriected to o
. 6mm bolt securi,ng the window lift mechanism.
ESPRIT
Issue 12n8