BODY
Page
B32
Vertical Adjustments
If
the door assembly requires verticol adjustment, then loosen the two large clomping
bolts securing to two hinge brockets just sufficient to allow up or down movement.
Move the door assembly to the required position and tighten clamping bolts.
DOOR
TRIM
PANEL REMOVAL
1.
Remove the trim inside the interior door handle, and loosen the three
screws securing door handle assembly to the door. Remove the
PVC
trim surround in its two holves.
Fig.
11
-
Interior door handle trim
ESPRIT
Issue
o4ns
To Next Page
Loading...
