Lotus Esprit Series - Door Lock; Door Lock and Linkages

BOW
Page B52
2. Connect the seat sensor wires (if fitted).
3. Apply underseal to the seat mounting bolts, nuts and washers, to
c.
prevent possible water entry.
DOOR LOCK
10 REMOVE
1 . Remove the door trim panel and PVC sheeting from the
door.
2. Remove the exterior door handle assembly (A)
3. Disconnect both remote control rods (E and F) from the lock assembly.
4.
Release the four bolts securing the lock (B) to the door and remove
the lock assembly together with the two
rods (C B D).
b
Fig.22 - Door lock and linkages
ESPRIT
Issue 04/78