HUB!§,WPBEEL,TPIWES
Page
GO
fit the cone spacer with its tapered end towards the hob, followed by the hub
retaining nut. Tighten the hub
nut to its specified torque loading.
2.
Fit a new split pin to retain the hub nut. Do
NOT
slacken the nut in order to
insert the split pin;
if
necessary, tighten the nut.
3.
Fit the road wheel and ti
g
hten its securing nuts to the specified torque
loading.
NOTE:
All Specifications and Torque Lwdings will be found in TECHNICAL
DATA.
Fig.2 Rear hub
ESPRIT
IsSlle
OAnR
To Next Page
Loading...
