1 Preparing the Installation
This chapter provides details on product identification, part names, correct installation
and cable specifications. To install the inverter correctly and safely, carefully read and
follow the instructions.
1.1 Product Identification
The G100 Inverter is manufactured in a range of product groups based on drive
capacity and power source specifications. Product name and specifications are
detailed on the rating plate. Check the product specification before installing the
product and make sure that it is suitable for the intended use. For more detailed
product specifications, refer to 11.1 input and Output Specification on page 303.
Open the packaging, and check the product name first and whether that the product is
free from defects. If the product is found to be faulty, contact your supplier.
To Next Page
Loading...
Need help?
General
