LSIS G100 - 6.4 Fault;Warning List

6.4 Fault/Warning List
The following list shows the types of faults and warnings that can occur while using
the G100 inverter. Please refer to 6 Learning Protection Features on page 177 for
details about faults and warnings.
Category
Description
Major fault
Latch
Over current trip
Over voltage trip
External signal trip
Temperature sensor trip
ARM short current fault trip
Option fault trip*
Over heat trip
Out phase open trip
In phase open trip
Inverter overload trip
Ground fault trip**
Fan trip
Motor over heat trip
Pre-PID operation failure
I/O board link trip
External brake trip
No motor trip
Low voltage trip during operation
Inverter pre-overheat trip
Over torque 1 trip
Under torque 1 trip
Over torque 2 trip
Under torque 2 trip
Level type
Low voltage fault trip
Emergency stop trip
Command loss trip
Fatal
External memory error
Analog input error
CPU Watch Dog fault trip