LSIS G100 - Preparing the Installation; 1.1 Product Identification

Table of Contents
1 Preparing the Installation
1.1 Product Identification
1.2 Part Names
1.3 Installation Considerations
1.4 Selecting the Installation Site
1.5 Cable Selection
2 Installing the Inverter
2.1 Mount on the Wall or within the Panel
2.2 Wiring
2.3 Post-Installation Checklist
2.4 Test Run
3 Learning to Perform Basic Operations
3.1 About the Keypad
3.1.1 About the Display
3.1.2 Operation Keys
3.1.3 Control Menu
3.2 Learning to Use the Keypad
3.2.1 Group and Code Selection
3.2.2 Navigating Directly to Different Codes (Jump Codes)
3.2.3 Setting Parameter Values
3.3 Actual Application Examples
3.3.1 Acceleration Time Configuration
3.3.2 Frequency Reference Configuration
3.3.3 Jog Frequency Configuration
3.3.4 Parameter Initialization
3.3.5 Frequency Setting (Keypad) and Operation (via Terminal Input)
3.3.6 Frequency Setting (Potentiometer) and Operation (Terminal Input)
3.3.7 Frequency setting with (internal) potentiometer and operation