LSIS G100 User Manual

Quick Reference Table
The table below is a summary of situations that users encounter frequently while
using the product. For faster and easier information searching, see the table below.
Situation
Ref.
I want to run a slightly higher rated motor than the inverter’s rated capacity.
p.179
I want to configure the inverter to start operating as soon as the power
source is applied.
p.76
I want to configure the motor’s parameters.
p.131
I want to set up sensorless vector control.
p.134
Something seems to be wrong with the inverter or the motor.
p.200,
p.289
What is auto tuning?
p.131
What are the recommended wiring lengths?
p.27
The motor is too noisy.
p.150
I want to apply PID control on my system.
p.123
What are the factory default settings for P1–P5 multi-function terminals?
p.24
I want to check recent trips and fault histories.
p 280
I want to change the inverter’s operation frequency using volume resistance.
p.49
I want to install a frequency meter on the analog terminal.
p.25
I want to check the motor's current using an ammeter.
p.53
I want to operate the inverter using a multi-step speed configuration.
p.71
The motor is too hot.
p.177
The inverter is too hot.
p.187
The cooling fan does not work.
p.155
I want to know how to store the inverter when it is not used.
p.300

LSIS G100 Specifications

General

Brand	LSIS
Model	G100
Category	Inverter Drive
Language	English