10.2.1 Storage
If you are not using the product for an extended period, store it in the following way:
• Store the product in the same environmental conditions as specified for operation
(refer to 1.3 Installation Considerations on page 5).
• When storing the product for a period longer than 3 months, store it between -10
˚C and 30 ˚C, to prevent depletion of the electrolytic capacitor.
• Do not expose the inverter to snow, rain, fog, or dust.
• Package the inverter in a way that prevents contact with moisture. Keep the
moisture level below 70% in the package by including a desiccant, such as silica
gel.
• Do not leave the inverter in a humid or dusty environment (e.g. Used as a device or
control panel at a construction site). Disassemble the product and store in a place
that is suitable for operation.
To Next Page
Loading...
