Select the drive mode of the cooling fan, attached to the motor.
As the cooling fan is connected to the motor
axis, the cooling effect varies, based on motor
speed. Most universal induction motors have
this design.
Additional power is supplied to operate the
cooling fan. This provides extended operation
at low speeds. Motors designed for inverters
typically have this design.
The amount of input current that can be continuously supplied to the
motor for 1 minute, based on the motor-rated current (bA.13).
Sets the amount of current with the ETH function activated. The
range below details the set values that can be used during
continuous operation without the protection function.
To Next Page
Loading...
