Total bytes=9
Monitor Registration Perform Request: A data read request for a registered
address, received from a monitor registration request
Total bytes=7
Monitor Registration Execution Normal Response
Total bytes= (7 x n x 4): a maximum of 39
Monitor Registration Execution Error Response
Total bytes=9
7.3.1.4 Error Code
The requested function cannot be performed by a
slave
The corresponding function does not exist.
The received parameter address is invalid at the
slave.
The received parameter data is invalid at the slave.
Tried writing (W) to a parameter that does not allow
writing (read-only parameters, or when writing is
prohibited during operation)
The frame size does not match.
To Next Page
Loading...
Need help?
General
