• Do not transport the inverter by lifting with the inverter’s covers or plastic surfaces.
The inverter may tip over if covers break, causing injuries or damage to the product.
Always support the inverter using the metal frames when moving it.
• Use a transport method that is suitable for the weight of the product. Some high
capacity inverters can be too heavy for one person to carry. Use an adequate number
of people and transport tool to safely move the product.
• Do not install the inverter on the floor or mount it sideways against a wall. The inverter
must be installed vertically, on a wall or inside a panel, with its rear flat on the
mounting surface.
To Next Page
Loading...
Need help?
General
