LSIS G100 - UL mark; CE mark; Low Voltage Directive; EMC Directive

UL mark
The UL mark applies to products in the United States and Canada. This mark
indicates that UL has tested and evaluated the products and determined that the
products satisfy the UL standards for product safety. If a product received UL
certification, this means that all components inside the product had been certified for
UL standards as well.
Suitable for Installation in a compartment Handing Conditioned Air
CE mark
The CE mark indicates that the products carrying this mark comply with European
safety and environmental regulations. European standards include the Machinery
Directive for machine manufacturers, the Low Voltage Directive for electronics
manufacturers and the EMC guidelines for safe noise control.
Low Voltage Directive
We have confirmed that our products comply with the Low Voltage Directive (EN
61800-5-1).
EMC Directive
The Directive defines the requirements for immunity and emissions of electrical
equipment used within the European Union. The EMC product standard (EN 61800-3)
covers requirements stated for drives.
EAC mark
The EAC (EurAsian Conformity) mark is applied to the products before they are
placed on the market of the Eurasian Customs Union member states.
It indicates the compliance of the products with the following technical regulations and
requirements of the Eurasian Customs Union:
Technical Regulations of the Customs Union 004/2011 “On safety of low voltage
equipment”
Technical Regulations of the Customs Union 020/2011 “On electromagnetic
compatibility of technical products”