specification details
terminal
A terminal
B terminal
Terminal for frequency reference setting
Refer to VR terminal
Test run
Time scale setting
0.01sec
0.1sec
1sec
Timer
Torque
Torque boost
manual torque boost
Over-excitation
trip
fault trips
fault/warning list
trip condition monitor
trip status reset
Troubleshooting Fault Trips
troubleshooting
other faults
Troubleshooting Fault Trips
Ｕ
U/V/W terminal
Under Load
under load trip
under load warning
under load trip Refer to Under Load
Unipolar
update
Up-Down Operation
User V/F pattern Operation
Using the keypad
groups/codes
Jump Code
Ｖ
V/F control
Linear V/F pattern operation
square reduction V/F pattern operation
User V/F pattern Operation
V1 terminal
Variable torque load
voltage drop
Voltage Drop
Voltage/current output terminal Refer to AO
terminal
VR terminal
Ｗ
warning
fault/warning list
warning messages
Wiring
3 core cables
Control terminal board wiring
Copper cable
Cover disassembly
Ferrite
Ground
Power terminal board wiring
Pre-insulated Crimp Terminal
Re-assembling the covers
Wiring length
WM(write mode error)
To Previous Page
Loading...
