Lucent Technologies MERLIN LEGEND Release 6.1 Installation

MERLIN LEGEND Communications System Release 6.1
Installation
555-661-140
Issue 1
August 1998
Installing the PC, CAT, or Printer
Page 5-15
Connecting a Printer to the Control Unit
Connecting a Printer Within 50 Feet (15.2 m)
If the printer is within 50 ft. (15.2 m) of the control unit and is connected
to the same 117-V AC branch as the control unit, use this procedure to
connect a printer to the control unit.
You need the following hardware for this procedure:
■ Z200A EMI filter
■ Adapter for the connector on the interface cable
— 355A for a male connector
— 355AF for a female connector

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English